The Hard Truth of Conversions: ASTM E140

LECO employee uses AMH55 to demonstrate easeThe Rockwell hardness test is one of the fastest and most convenient hardness testing methods used around the world. With the lack of sample prep and optical requirements, it is the easiest to work into automated production lines, and the common Rockwell hardness scale C (HRC) is an easy way to refer to the hardness of metals that even the lay person can understand. However, it is not the only hardness testing method. Knoop (HK) and Vickers (HV) hardness testing methods can also find the hardness of a material, but the values are not interchangeable. To compare material hardness, the values must be in the same hardness scale.

Rockwell hardness testing has a lot of advantages over the other testing methods, primarily with the speed of testing. That being said, there are some materials that cannot be tested with a Rockwell method. Small, thin, or fragile samples needs Knoop or Vickers testing for an accurate measurement.

ASTM E140 is a standard for hardness conversion tables. It includes many different materials and conversion numbers between various testing methods as well as equations for using these conversions. In theory, you should be able to find your material, plug your numbers and the conversion number into the appropriate equation, and be able to convert your hardness values between scales with perfect accuracy. In practice, however, these tables are not nearly that precise.

Material hardness is a combination of various properties of said materials. Not every nickel alloy, for example, is going to have the exact same hardness due to material alloy, grain structure, heat treatment, and more. The values in the ASTM E140 tables are all approximate, calculated from testing done many years ago, some even on equipment that is no longer used today, and called out as such in every table title. Beginning with an approximate conversion value means that the actual calculated conversion, by its very definition, must also be approximate. It is impossible to calculate an exact conversion using ASTM E140.

Nevertheless, sometimes conversions do need to be made using the tables in this specification. An engineering drawing or material specification may call out a Rockwell hardness requirement that is impossible to measure on the sample at hand. This is where the conversion tables are useful, but when conversions are made, the conversion must be clearly stated on any data reporting. 

AMH55 Automated Hardness TestingThe unfortunate truth is that hardness testing values cannot be converted accurately between methods, and the best practice is to always use the correct hardness test for the method being used. Hardness testing doesn’t need to be difficult, though. LECO’s AMH55 hardness testing system is capable of automating the process for Knoop or Vickers testing that is just as easy to use as a Rockwell hardness tester. Learn more about the AMH55 and LECO’s start-to-finish metallographic solution today.

Learn More about the AMH55